Alignment off on ZALR23

[ellysgifts]

The layer 2 of ZALR23 is way off. The red boxes that are supposed to show where the photos go are not in the correct position. The bottom boxes for the lettering of FAMILY or HOME are not correct either. If we use the red boxes to center test vertically, the lasering comes out misaligned. We have had to go in and change layer 2 to move the boxes down to the correct spot. (We took the ZALR23 that was ruined and used it to align the boxes to the proper height).

This becomes a very costly mistake if one does not red eye EVERY product at least once.

[TimG]

The red outlines for both the photos and the lower lettering (for both four- and six-letter styles) were indeed off. I've updated all eight relevant files to have the correct position for the upper photos and to have the correct positions indicated for both four- and six-letter styles on every template. It looks a little "busy" on screen, but should help you confirm your engravable space from any template to any blank style. Perform a file update (tomorrow or later) or click all eight links below if you just want the changed files.

ZALR20A
ZALR20B
ZALR21A
ZALR21B
ZALR23A
ZALR23B
ZALR26A
ZALR26B

Tim

[ellysgifts]

Thanks Tim. The updated files look GREAT!