Search:

Looks good, thanks for sharing your solution!

A fairly reliable method is to just run every file through www.vectormagic.com, even the vector EPS's.
That will process the file and allow you to save with only two colors, as needed for Gravograph.

Problems with the leather pieces are almost always a focus issue.
It's always important to make sure the top surface is as flat as possible. Sometimes they get warped a little bit in shipping or...

I have not used the Clipping Magic program at all, so I can't comment on how well it works.
If it's anything like Vector Magic though, they will likely give you two free credits to try it out before...

If you're using bitmap clipart (such as .JPG, .BMP, .GIF) files, the speed/power is automatically set by the laser, as if you were lasering a photograph.
To specify exact speed and power settings,...

Another option would be to rotate the artwork 180 degrees, so you could use the jig with the handle on the same side (the mug will be upside down).

On that product the usual problem with light engraving is that the piece isn't completely flat.
It may have a bit of a bend or depression in the center that causes the engraving to not turn out...

It looks like we neglected to post those PDF's to this site.
They are now posted and available at http://www.laserengravings.info/forum/content.php?130-Scan-Books-and-Catalogs

There is a slight variance in color when large quantities of mugs are painted and this particular batch did come out a little darker than the first batch of mugs.

Press F10 to bring up the settings box, then click the "Reset All Parameters" button.
This will force you to restart GravoStyle, so be sure to save your work if needed.
Also, this will fail if you...

If you are having trouble with the GravoTouch Launcher for some reason, it may be related to your internet connection or other issue with the automatic file update process.
In this case, you can...

We do not have a video of somebody cleaning the laser, but we do have a Laser Maintenance Checklist document, with description and photos of the process.

You can just click and drag the toolbar off of the top, and it'll snap back to a pop-up box.

You can download either single photos or an entire folder.
Here's some instructions: http://www.pgrahamdunn.com/dealerpagefiles/How%20to%20download%20product%20photos.pdf

Just for reference, both...

http://www.pgrahamdunn.com/photos

David,

I checked with Anthony about the advertising pages, here is his reply:

The January 2014 scan book is available under Documentation: http://www.laserengravings.info/forum/content.php?130-Scan-Books-and-Catalogs

It's a little brief, but does contain images, skus, and...

Here's some further information on clipart from our forums: http://www.laserengravings.info/forum/showthread.php?41-Need-More-Clipart&highlight=clipart

It sounds like you may be looking at the "Product Guide" which is intended for ordering blank products. The barcodes all have 12 digit numbers under them which correspond to the blank product UPC....

89

msat508,

Please see the attached photo of the product + jig.
This is a test we ran this morning, and the alignment looks very good.
I wonder if perhaps you may have used the wrong jig? ...

As many of you know, the replacement filters are rather expensive, and can add up to a rather large expense for a busy store.
We have tried to source these filters as economically as possible, but...

I see why you would be having trouble importing this logo.
Looking at the EPS file in CorelDraw, I noticed that there are a number of shapes that are either filled with white, or have a white...

Could you send me a particular EPS file that you are having trouble with?
I'd like to see what issues you are experiencing, and perhaps I could use that to illustrate a tech doc or similar

You can view the page at http://www.laserengravings.info/forum/content.php?207-Laser-Maintenance-White-Lithium-Grease-now-available!

Sure, here's the Laser Engravings logo in a couple of different formats for you
JPG format
AI format
PDF format