PDA

View Full Version : Yellow Layers



Arrowhead Laser Center
01-27-2011, 04:39 PM
We are having trouble copy and pasting the symbol in ZVFN05 & ZKMC16
When we paste it into another layout we loose the yellow layer-it engraves it out instead of leaving the wood. What are the settings that will make it leave the wood in?
Kim Seavey

TimG
01-28-2011, 10:08 AM
You need to change the "Marking" settings in the file where you paste into. This works in the original ZVFN05 & ZKMC16 files because the yellow "ink" is set to zero power and zero speed, telling the laser to just leave that yellow shaded area alone. The file that you're trying to run it on may have yellow set to be 20 power, 20 speed. Change the yellow in the Marking dialog to zero power, zero speed. Also, the "Bitmap" mode needs to be set to automatic (the computer icon) and the slider all the way to the right, showing 100 in the box. See the attached image. You should be able to leave the other settings alone.

http://www.laserengravings.info/forum/user_images/yellow-ink.png

Arrowhead Laser Center
01-28-2011, 12:45 PM
thanks we figured out the yellow settings but not the bitmap settings so thank you